7:00AM to 5:00PM
Mon to Fri:
7:00AM to 5:00PM
What would you do if water suddenly started pouring from your ceiling or walls?
Burst pipes can catch anyone off guard. They often strike without warning, caused by things like freezing temperatures, old or damaged pipes, or sudden pressure changes.
When they do, the damage can be fast, messy, and expensive—flooded floors, ruined furniture, and even structural issues.
In a moment like that, keeping a cool head and acting fast is key. Panicking only delays action, and every second counts when water’s gushing out.
That’s where this blog comes in. We’ll walk you through the first steps to take when a pipe bursts— simple actions that can help minimise damage, protect your home, and keep your family safe.
The first crucial step in a burst pipe emergency is to turn off the water supply. In most Australian homes, the main water supply shut-off valve is located near the front garden tap or close to the water meter. Knowing this spot can make all the difference.
To stop the water flow, turn the main valve clockwise until it’s fully closed. This stops water pipe pressure and prevents further damage.
Even a few extra minutes of water gushing from a broken pipe can cause significant damage to floors, walls, and ceilings.
Excessive water pressure, blocked pipes, or freezing temperatures can create weak points in your plumbing system that eventually burst. Left untreated, this can lead to standing water, mould and mildew, and major structural damage.
Acting fast helps relieve pressure, reduce water damage, and makes things safer until a licensed plumber or emergency plumber arrives to fix the affected area.
Water and electricity don’t mix. If a pipe bursts near electrical outlets or appliances, there’s an immediate danger of electrical hazards.
If safe, switch off the power at the main switchboard to avoid further risks, especially in wet areas or near the kitchen sink.
Don’t step into the water to reach the board—wait for a professional plumber or emergency plumbing services if unsure. Electrical hazards from burst pipes can lead to health risks and mould growth if the affected area is left untreated.
If you can’t access the switchboard safely, stay clear and wait for a reputable plumber or electrician.
Turning off power early can prevent burst pipes from causing extra problems, like damaged pipes from poor installation or excessive water pressure on older pipes.
After you turn off the water at the main valve, open all the taps in your home to drain the remaining water from the plumbing system. Start with the cold taps upstairs and work your way down. This helps reduce water pressure and clears pipe water sitting in the lines.
Then, turn on the hot taps to relieve pressure in the hot water system. This is a crucial step in a burst pipe emergency and helps prevent burst pipes from reoccurring due to significant pressure buildup.
Don’t flush toilets, use the kitchen sink, or run any fixtures—wait until a professional plumber has assessed the damage. Using them can force more water through damaged pipes or weak points.
These emergency steps give your licensed plumber a safer, pressure-free system to work with and reduce the risk of further damage from excessive water pressure or blocked pipes.
Finding the pipe burst location is key. Look for signs like wet areas, water stains, bulging ceilings, or water leaks behind walls.
If you spot standing water near electrical outlets or the kitchen sink, there’s immediate danger. A broken pipe behind walls can also create weak points that eventually burst again.
It’s also important to figure out if it’s a clean water pipe or waste line. Burst water pipes from freezing temperatures or excessive water pressure can be harder to detect, especially if the pipes are hidden.
In a plumbing emergency, Gold Coast residents often face the problem of knowing when to step in or wait. You can use towels or buckets as a temporary fix, but avoid risky areas.
Leave bad installation issues, damaged pipes, or high-pressure leaks to a licensed plumber. Trying to patch it with duct tape isn’t safe when pipe bursts happen near electrical hazards or structural damage.
After shutting down the main water supply, quickly move belongings from the affected area. Remove rugs, electronics, and valuables from wet areas to avoid burst pipes and water damage.
Even a small amount of standing water left untreated can cause mould and mildew, leading to serious health risks and expensive structural damage.
Use buckets or towels to control minor leaks if they are safe, but don’t use plumbing fixtures or flush toilets until repairs are complete. Take clear photos of the water damage to support your insurance claim—this is especially important in a commercial space where losses can add up quickly.
Protecting your space with these burst pipe emergency tips helps prevent mould growth and further damage. If you notice mildew growth, poor installation signs, or older pipes, raise them with your plumber.
Regular maintenance and a reputable plumber are your best defence against future plumbing problems.
It’s time to call a plumber for burst pipe issues. A licensed plumber is legally required in Queensland to handle repairs—especially for damaged pipes, hidden leaks, or work involving the main water supply.
Attempting to DIY a broken pipe could worsen the issue or void your insurance claim.
A reputable plumber will inspect the entire plumbing system for signs of bad installation, tree roots, excessive water pressure, or older pipes that may eventually burst. These weak points are often overlooked but can create significant damage if ignored.
A Gold Coast plumber offering emergency plumbing services can quickly assess the situation and restore normal water pressure. Avoid duct tape or quick fixes—let the plumber arrive and properly secure the affected area.
Whether it’s a water pipe split from extreme cold weather conditions or pipes freezes from poor insulation, acting fast prevents burst pipes from returning and ensures reliable service.
Once your emergency plumber has made the area safe, it’s time for post-burst pipe clean-up. Open windows, run fans and use a dehumidifier to dry the affected area. This helps prevent mould growth, mildew growth, and long-term structural damage.
Burst water that seeps into carpets or behind walls can create health risks if left untreated. If you’re dealing with significant water flow or flooding, call emergency plumbing Gold Coast restoration professionals to assist. They’ll detect hidden moisture and make sure no water leak remains behind the scenes.
Cleaning up quickly also reduces the chance of mould and mildew forming. Regular maintenance after a plumbing emergency helps prevent burst pipes and protects your home or commercial space from future issues linked to freezing temperatures or poor installation.
When a pipe bursts, there’s no time to waste. A burst water pipe can flood your home, ruin your belongings, and damage your plumbing system beyond repair if not handled fast.
That’s where the team at Gold Coast Plumbing Company steps in with fast emergency plumbing services and reliable service you can count on.
From cold weather cracks to pipe freezes, blocked pipes, and poor installation, our professional plumbers know how to handle it all. We’re available when you need us most—providing fast support, high-quality repairs, and expert advice to prevent burst pipes in future.
Whether it’s a water leak under the kitchen sink, a broken pipe behind the walls, or signs of excessive water pressure, we’ll fix the issue properly the first time. With every plumber licensed and insured, you’re in safe hands.
Don’t let a plumbing emergency cause further damage— contact our emergency plumber team for trusted burst pipes repair today.
